Maxicopter

CHASSIS DROIDWORKS AD-4

AD-4 standard + medium heavy lift = 14” propeller
Price: 695.00€

Ask a question about this product
Our AD-4 standard + medium heavy lift =14” propeller quad frame comes complete, ready for assembly – the boom size of this craft allows for up to 14” propellers. Recommended set-ups are available on the homepage of this site in the section ‘set-up’, including information about various engine/propeller combinations.

All Droid frames are made from high quality, lightweight and vibration absorbing aerospace composite materials for optimum performance and are ready to accept the MikroKopter UAV electronics set.

Impact resistant dome - vibration absorbing components - UV resistant materials - non toxic and chemically inert composites.

Span width from engine to engine: 630mm. The booms can be shortened for 10” propeller configurations only.

The standard Droid 40mm engine mounts accommodate the larger 2814 series Axi and Pulso motors and the MK3538 engine as well as the smaller 2217 series Axi and Pulso motors and Robbe Roxy 2827 series engines. The motors are attached to the engine mounts via the standard 16-19mm and 19-19mm firewall mount spacing.

Please note if you want to run the 2820 series Axi or Pulso engines on this craft you will need to purchase the optional 50mm super heavy engine mount sets available in accessories section of the shop.

For more detailed information on this frame go to AD-4 via the homepage of this site.

Total weight approx: 350 grams

________________________________________________________________________________________________

CHASSIS DROIDWORKS AD-4
Heavy lift + Extended - Gros porteur Surélevé

AD-4E extended undercarriage = 14” propeller
Price per Unit (piece): 735.00 €

Ask a question about this product
Our AD-4 extended undercarriage =14” propeller quad frame comes complete, ready for assembly. The standard landing gear is replaced with the extended landing gear, increasing the standard clearance of 16 cm from gear rail to ground level to 36 cm to allow fitting the Droidworx/PhotoHigher Pro Camera Gimbal.

The boom size of this craft allows for up to 14” propellers. Recommended set-ups are available on the homepage of this site in the section ‘set-up’, including information about various engine/propeller combinations.

All Droid frames are made from high quality, lightweight and vibration absorbing aerospace composite materials for optimum performance and are ready to accept the MikroKopter UAV electronics set.

Impact resistant dome - vibration absorbing components - UV resistant materials - non toxic and chemically inert composites.

Span width from engine to engine: 630mm.

The standard Droid 40mm engine mounts accommodate the larger 2814 series Axi and Pulso motors and the MK3538 engine as well as the smaller 2217 series Axi and Pulso motors and Robbe Roxy 2827 series engines. The motors are attached to the engine mounts via the standard 16-19mm and 19-19mm firewall mount spacing.

Please note if you want to run the 2820 series Axi or Pulso engines on this craft you will need to purchase the optional 50mm super heavy engine mount sets available in accessories section of the shop.

For more detailed information on this frame go to AD-4 via the homepage of this site.

Total weight approx: 435 grams

Tarif: 589€