Maxicopter

NACELLE DSLR Pro - AV200
890.00€

This mount fits the Droid airframe gear rail assembly directly - although it requires the Droid extended landing gear assembly for clearance from the ground.

This full assembly (as the standard droid landing gear assembly does) will fit existing Mikrokopter Octo and Hexa airframes.

If you already have a Droid frame or standard landing gear assembly you can simply replace the standard size plates with the carbon fibre landing gear plates extended.

This gymbal is a professional level camera housing with 5: 1 tilt, 10: 1 reduction on roll for very fine and smooth gyro stabilization directly off the flight controller and on-board motion control sensors.

It is precision engineered, beautifully designed and crafted by an expert in the field of RC AP and is primarily constructed from lightweight alloys and machined engineering plastics. It has a high speed coreless roll servo with an external 10 turn potentiometer - digital servo on tilt driving a toothed belt with a fully adjustable camera table for c of g positioning and balancing.

The mount will easily house a large DSLR (canon 7D) or a high quality HD video camera - due to its weight and size it is recommended that a heavy lift AD-4 or AD-6 is used. With heavier payloads shorter flight times are to be expected.

This mount is still being tested for optimum setup - more details to come after August 20th. We'll keep you informed.

Weight: 590 grams
Internal space dimensions: 145mm high x 170mm wide.

360 degree pro-mount (AV200) and pro-mount mini (AV130) for droidworx. These two new offerings from Photohigher are a special adaptation to extend the "creative range" of possibility for aerial videography.

Designed primarily for a two person operation where a "camera operator" now has full control over the camera independent from the pilot...but can also be controlled by the pilot.

The 360 series gimbals will fit the droidworx gear rail assembly for the AD series standard (av130) and heavy lift craft, (av130 and av200). the unit is center mounted on the droidworx gear rail assembly with twin droidworx battery bays either side.

Custom CF skid set which attach to the Pro (av200) and pro mini (av130) along with the 360 head will be available from photohigher as an upgrade set for those who purchased the pro or pro mini in recent weeks. Pricing is still as yet unavailable.

Higher Torque full size servos on the av130 are now standard for both the 360 and two axis version.

Tarif: 379.00€